Art. 2002

DOUBLE-HEAD ultrasound welder for soft and resin-bonded fabrics with automatic fabric feeding and pre-feeding of material.

Art. 2002 DOUBLE-HEAD ultrasound welder for soft and resin-bonded fabrics with automatic fabric feeding and pre-feeding of material. Machine to cut and weld, by means of ultrasounds, resin-bonded and Trevira CS fabrics, for vertical curtains. The bench in inox steel is equipped with an electronic precision motor for automatic feeding of the fabric at the established size. Pre-feeding of the material under the cutting unit is motorised and starts up automatically after each cutting operation or manually by pressing the special push-button. Welding is carried out manually by the operator, pressing two buttons simultaneously. The minimum time necessary to weld one end of the fabric is 2 seconds. It is equipped with a Siemens minicomputer to set up the various processing operations and communicate any messages or anomalies.

 

It is possible to set up the following parameters with the computer:

1. length in mm of the fabric to be cut

2. working cycle (soft/resin-bonded cycle)

3. fabric welding, cooling and folding times, (in seconds)

4. number of fabric lengths to be produced

5. number of metres of fabric available (during operation, the computer automatically deducts the metres of fabric utilised)

6. step cycle for inclined vertical curtains

7. temperature adjustment for fabric cutting.

 

Characteristics:

Power supply: 220 Volt, maximum single-phase current 6A

Dimensions in metres: length 5.2, width 0.90, height of control unit 1.20

Weight: 260 Kg.

Working pressure: 6 bar.

Maximum cutting length: 4.36 metres.